What Is the Difference Between 3D Printing and Injection Molding? A Data-Driven Comparison for Strategic Decision-Making

The choice between 3D printing and injection molding isn’t just about technology—it’s about aligning manufacturing processes with business goals. While both methods produce plastic parts, their cost structures, Ledetider, and material capabilities diverge sharply. Below is a pragmatic, data-backed breakdown to help engineers, product managers, and entrepreneurs decide which path to take.

1. Core Differences: Where Each Method Excels

| Factor | 3D -utskrift | Injeksjonsstøping |
|--------------------------|--------------------------------------------------------------------------------|--------------------------------------------------------------------------------------|
| Lead Time | 1–7 days (for 1–100 parts) | 4–12 weeks (verktøy) + 1–3 days (production runs) |
| Unit Cost at Scale | $5–$50/part (declines only 5–15% at 1,000 units) | $0.10–$5/part (drops 60–80% when scaling from 1,000 til 100,000 units) |
| Material Range | 100+ polymerer (PLA, Abs, Nylon, TPU, Peek, Harpiks) | 25,000+ grades (Pp, PC, Peek, LSR, TPE, Biopolymers, Glass/Carbon-filled) |
| Tolerances | ±0.005–0.020 inches (0.13–0.5mm) | ±0.002–0.005 inches (0.05–0.13mm) |
| Minimum Order Size | 1 part (ideal for prototyping) | 10,000+ deler (economical only at scale) |
| Avfallsgenerering | 5–15% material waste (support structures, unused powder) | 2–8% waste (falske, løpere, defective parts) |
| Overflatebehandling | Ra 6.3–12.5μm (125–500 RMS) unpolished; Ra 1.6–3.2μm (63–125 RMS) post-processed | Ra 0.4–1.6μm (16–63 RMS) standard; Ra ≤0.1μm (4 RMS) with polishing |
| Design Freedom | Unrestricted geometries (organic shapes, interne kanaler, lattice structures) | Limited by draft angles (1–5°), uniform wall thickness, and ejection constraints |

2. Cost Analysis: When Scale Tips the Balance

EN. Prototyping & Low-Volume Runs (1–1,000 Parts)

• 3D Printing Advantage:
• EN 100-unit run of nylon 6/66 gears costs $1,200 (Fdm: $12/part) vs. $18,000 for injection molding (verktøy: $15,000 + deler: $0.30/part).
• Lead time: 3 dager (3D -utskrift) vs. 6 uker (verktøy + produksjon).
• Best For: Consumer electronics prototypes, medical device trials, or custom automotive parts.

B. High-Volume Production (10,000+ Deler)

• Injection Molding Advantage:
• EN 100,000-unit run of polypropylene (Pp) bottle caps costs $15,000 (tooling amortized over 100k units → $0.15/part) vs. $500,000 for 3D printing ($5/part).
• Cycle time: 2 seconds/part (high-speed machines) vs. 20–60 minutes/part (3D -utskrift).
• Best For: Emballasje, bilkomponenter, or mass-market consumer goods.

3. Materiale & Performance Trade-offs

EN. 3D -utskrift: Flexibility at a Cost

• Strengths:
• PEEK/ULTEM: High-temperature resistance (opp til 482°F/250°C) for aerospace brackets.
• TPU/Silicone: Flexible, rubber-like parts (F.eks., shoe soles, pakninger) without secondary processes.
• Harpiks: UV-resistant, biocompatible, or flame-retardant materials (F.eks., Formlabs Dental SG for aligners).
• Weaknesses:
• Anisotropy: FDM parts are 30% weaker along the Z-axis (layer lines).
• Size Limits: Build volumes rarely exceed 24×24×24 inches (600×600×600mm).

B. Injeksjonsstøping: Presisjon & Varighet

• Strengths:
• Engineering Resins: Glass-filled nylon (30% stronger than unfilled) for power tool housings.
• LSR (Liquid Silicone Rubber): Transparent, autoclavable seals for medical devices.
• Overmolding: Combine rigid and soft materials (F.eks., TPU grip on a polycarbonate phone case).
• Weaknesses:
• Materialkostnader: PEEK for injection molding costs $80–$120/kg vs. $200–$300/kg for 3D printing.
• Design Rigidity: Changing a part’s geometry requires a $10,000+ mold rework.

4. Industry Use Cases: Real-World Applications

EN. 3D Printing Success Stories

• Medical: Stratasys J750 Digital Anatomy Printer produces hyper-realistic heart models (with valves, ventricles, and tumors) for surgical planning in 24 hours at $500/modell (vs. $5,000 for silicone casting).
• Luftfart: Airbus uses Markforged X7 to print 1,000+ titanium brackets for A350 cabins, reducing weight by 40% vs. machined aluminum.
• Forbruksvarer: Adidas 3D-prints 50,000 pairs of Futurecraft 4D midsoles annually, enabling custom lattice densities for personalized cushioning.

B. Injection Molding Success Stories

• Bil: Tesla’s Gigafactory in Shanghai injection-molds 1 million PP battery trays/year at $0.12/part, with 99.9% defect-free rates (vs. 95% for 3D-printed trays).
• Medical Devices: BD (Becton Dickinson) injection-molds 5 billion LSR syringe plungers/year, meeting ISO 13485 and FDA biocompatibility standards.
• Emballasje: Nestlé uses thin-wall injection molding to produce 1.2 billion yogurt cups/year with 0.4mm walls (30% lighter than blow-molded alternatives).

5. Emerging Hybrid Models: The Best of Both Worlds

EN. 3D-Printed Molds for Injection Molding

• Use Case: Low-volume production (100–10,000 parts) where traditional tooling is too expensive.
• Data:
• EN DMLS (Direct Metal Laser Sintering)-printed steel mold costs $3,000–$8,000 and lasts for 5,000–15,000 shots (vs. $50,000+ for hardened steel molds with 1M+ shots).
• BMW reduced dashboard vent tooling lead times from 6 weeks to 6 dager using this approach.

B. Injection Molding for 3D-Printed Parts

• Use Case: Scaling 3D-printed designs to high volumes.
• Data:
• Carbon3D’s L1 printer produces 100,000 parts/year with surface finishes rivaling injection molding (Ra ≤1.6μm), but at $0.30/part vs. $0.10/part for traditional molding.
• Companies like Gillette bruk 3D-printed razor handle prototypes to validate designs before committing to $2M injection molds.

6. My Perspective: A Framework for Decision-Making

With 18 years in additive and subtractive manufacturing consultancy, here’s my rule of thumb:

Choose 3D Printing When:

• You need 1–1,000 parts i <2 uker.
• Your design has complex geometries (F.eks., interne kanaler, lattice structures).
• You’re testing multiple iterations before finalizing a design.
• Material properties like flexibility, Varmemotstand, or biocompatibility are critical.

Choose Injection Molding When:

• You need ≥10,000 parts/year.
• Tolerances are tighter than ±0.005 inches (F.eks., medisinsk, luftfart).
• Per-unit cost must be < $1 (excluding tooling).
• You need consistent mechanical properties (no layer lines or anisotropy).

Consider a Hybrid Approach When:

• You need 1,000–10,000 parts and can’t afford traditional tooling.
• You’re producing short-run custom products (F.eks., dental aligners, hearing aids).
• You need functional prototypes in production-grade materials (F.eks., Peek, LSR).

Final Thoughts: The Strategic Imperative

3D printing and injection molding aren’t competitors—they’re tools in a broader manufacturing toolkit. The right choice depends on:

• Your product’s lifecycle (prototype vs. masseproduksjon).
• Your financial constraints (capex for tooling vs. per-unit costs).
• Your market’s demands (customization vs. standardization).

Key Takeaways:

• Til speed and flexibility, 3D printing wins.
• Til precision and scale, injection molding dominates.
• Til middle-ground needs, hybrid approaches (F.eks., 3D-printed molds, micro-molding) bridge the gap.