Is Injection Molding Only for Plastic? A Reevaluation of Materials, Processes, and Emerging Frontiers

The term "injeksjonsstøping" conjures images of thermoplastics like ABS, polypropylen, and nylon flowing into molds to create everything from toothbrush handles to automotive dashboards. Imidlertid, this perception—rooted in the process’s 20th-century dominance in plastics—oversimplifies its capabilities. Modern injection molding transcends polymers, encompassing metaller, keramikk, biocomposites, and even edible materials, driven by advances in materials science, tooling technology, and sustainability demands. Below is a nuanced exploration of how injection molding is evolving beyond plastics, supported by technical data, industrial case studies, and forward-looking perspectives.

1. Metal Injection Molding (MIM): A $4.2B Industry Disrupting Machining

EN. Behandle & Materials

• Mechanism: MIM combines fine metal powders (50–65% by volume) with thermoplastic binders (F.eks., paraffin wax, polyethylene glycol) to create a feedstock that behaves like plastic during injection. After molding, debinding (thermal or solvent-based) removes binders, leaving a "green part" that is sintered at 70–90% of the metal’s melting point to achieve 95–99% density.
• Materials:
• Stainless steels (17-4PH, 316L): Used in medical implants (F.eks., Stryker’s MIM-produced spinal fusion cages) due to biocompatibility and corrosion resistance.
• Tungsten alloys (90–97% W): Applied in radiation shielding for nuclear power plants (F.eks., Plansee’s MIM collimators) hvor high density (19.3 g/cm³) outweighs lead’s toxicity.
• Titanium (Ti-6Al-4V): Enables lightweight aerospace components (F.eks., GE Aviation’s MIM turbine nozzles) with 50% cost savings vs. 5-axis CNC machining.

B. Advantages Over Traditional Metalworking

• Complexity at Scale: MIM produces net-shape parts with internal undercuts, tråder, and micro-features (F.eks., 0.3mm-diameter cooling channels in MIM-made heat sinks) that would require multi-step EDM/CNC machining.
• Cost Efficiency: EN MIM-produced stainless steel watch case costs $0.80/unit at 100,000 units/year, mens CNC machining costs $4.20/unit due to material waste (opp til 70%) og longer cycle times (15 min vs. 20 sec for MIM).
• Data:
• Market Growth: The MIM industry is projected to reach $4.2B by 2028 (CAGR 8.3%), driven by medisinsk (+9.2%) og elektronikk (+8.7%) kreve (Grand View Research, 2023).
• Presisjon: MIM achieves tolerances of ±0.3% for dimensions <50mm (F.eks., 0.15mm variation in a MIM-made smartphone SIM ejector pin).

C. Limitations & Counterarguments

• Material Density: Sintered MIM parts have 2–5% porosity, limiting high-pressure applications (F.eks., hydraulic valves still rely on investment casting).
• Verktøykostnader: EN 48-cavity MIM mold costs $150,000–$250,000 (vs. $50,000 for plastic injection molds) due to abrasive metal powders wearing out tool steel faster.
• Post-Processing: HIP (Hot Isostatic Pressing) may be needed to eliminate residual porosity, adding $1.50–$3.00/part og 2–4 hours to lead times.

2. Ceramic Injection Molding (CIM): Bridging the Gap Between Plastics and Powder Metallurgy

EN. Behandle & Applikasjoner

• Mechanism: Similar to MIM, CIM uses ceramic powders (F.eks., alumina, zirconia) mixed with binders (F.eks., polyvinyl butyral, stearic acid) to create feedstock that is injected into molds, debound, og sintered at 1,400–1,700°C.
• Applikasjoner:
• Dental Implants: Zirconia crowns (F.eks., Ivoclar Vivadent’s IPS e.max ZirCAD) are CIM-molded with 0.2mm wall thicknesses og translucency matching natural teeth.
• Elektronikk: Alumina insulators (F.eks., Kyocera’s CIM-made substrates for 5G base stations) withstand 10kV/mm dielectric strength og 1,000°C thermal shocks.
• Luftfart: Silicon nitride bearings (F.eks., CoorsTek’s CIM components for jet engines) operate at 1,200° C. without lubrication.

B. Comparative Edge Over Rival Processes

• Microstructural Control: CIM enables gradient porosity (F.eks., 0.1–10µm pores in filtration membranes) via tailored binder systems, surpassing extrusion’s uniform porosity limits.
• Energy Efficiency: EN CIM-produced alumina sensor housing consumes 40% less energy enn dry pressing + CNC machining due to redusert materialavfall (90% vs. 60% yield).
• Data:
• Market Share: CIM accounts for 12% of global ceramic parts production (opp fra 3% i 2010), driven by medisinsk (+15% CAGR) and semiconductor (+12% CAGR) kreve (Ceramic Industry, 2023).
• Overflatebehandling: CIM achieves Ra < 0.1µm without polishing (F.eks., optical mirror substrates for telescopes), whereas slip casting requires 8 hours of lapping.

C. Challenges & Workarounds

• Binder Removal: Incomplete debinding causes blistering; catalytic debinding (using nitric acid) reduces process time from 48 til 8 timer but increases hazardous waste.
• Shrinkage Variability: 15–20% linear shrinkage during sintering demands compensation in mold design (F.eks., over-molding a 10mm part by 1.8mm to achieve 10mm final size).
• Tooling Wear: Tungsten carbide molds (costing 3x more than steel) are needed for zirconia CIM due to abrasive particle sizes <5µm.

3. Biocomposites & Edible Injection Molding: Sustainability Meets Innovation

EN. Biodegradable Polymers & Natural Fibers

• Materials:
• PLA/wood flour composites (F.eks., Arboform® by Tecnaro) for eco-friendly consumer goods (F.eks., injection-molded sunglasses frames with 30% lower carbon footprint than plastic).
• Algae-based polyurethanes (F.eks., Bloom Foam by AlgiKnit) for shoe midsoles that biodegrade in 180 days in marine environments.
• Data:
• Market Potential: De biocomposite injection molding market is projected to reach $1.2B by 2030 (CAGR 11.5%), led by emballasje (+14%) og bil (+12%) (MarketsandMarkets, 2023).
• Performance: EN flax fiber-reinforced PP composite achieves 25% higher tensile strength enn virgin PP at 15% lower density (F.eks., Ford’s biocomposite interior trim panels).

B. Edible Injection Molding: From Confectionery to Pharmaceuticals

• Applikasjoner:
• Chocolate 3D Printing (F.eks., Choc Edge’s CocoJet) uses modified injection molding to create custom candy shapes with 0.1mm feature resolution.
• Pharma Tablets (F.eks., Aprecia’s ZipDose® technology) injects powdered drugs + binder into molds to produce orally disintegrating tablets that dissolve in <10 seconds.
• Innovation: Mitsubishi Chemical is developing edible PLA molds for gelatin capsules, reducing plastic waste in pharma packaging ved 90%.

4. My Perspective: When to Use Non-Plastic Injection Molding (and When to Avoid It)

With 15 years in advanced manufacturing R&D, here’s my framework:

Opt for non-plastic injection molding when:

• High complexity justifies cost: MIM-made dental crowns (costing $15/unit) are 10x cheaper than CNC-milled gold crowns despite $500,000 mold investment.
• Material properties are non-negotiable: CIM zirconia outperforms machined alumina i thermal shock resistance (800°C vs. 600° C.) for engine sensor housings.
• Sustainability drives demand: Biocomposite car interiors (F.eks., BMW’s flax fiber door panels) reduce CO₂ emissions by 12kg/vehicle sammenlignet med glass fiber-reinforced PP.

Avoid non-plastic injection molding when:

• Production volumes are low: MIM tooling amortization requires >50,000 units/year; CNC machining is cheaper for <1,000 units.
• Tolerances are ultra-tight: CIM alumina achieves ±0.1% dimensional accuracy, men optical polishing still adds $5/part og 3 dager til laser gyroscope mirrors.
• Regulatory hurdles are high: MIM medical devices require 18–24 months of biocompatibility testing (ISO 10993), whereas machined titanium has pre-approved grades (F.eks., ASTM F136).