What Plastic Is Good for Molding? A Data-Driven Guide to Material Selection

Choosing the right plastic for molding isn’t just about cost or availability—it’s a strategic decision that impacts part quality, production speed, and your bottom line. With thousands of plastic grades on the market, how do you cut through the noise? Let’s break down the top contenders with hard data, real-world use cases, and expert insights to help you make an informed choice.

1. The Workhorses: Best-in-Class Molding Plastics

Here are the plastics that dominate molding applications, backed by performance metrics and industry adoption rates:

• Polypropylene (PP)
• Best For: Consumer goods, auto -onderdelen, medische hulpmiddelen, en verpakking.
• Why It Wins:
  • Lightweight & Durable: 90% the density of water (0.90 g/cm³), reducing shipping costs.
  • Chemical Resistance: Withstands acids, honken, and solvents (ideal for lab equipment).
  • High Flow Rate: Melt flow index (MFI) of 2–35 g/10min (fast cycle times).
• Data Insight: A 2023 Grand View Research report found PP accounts for 21% of global thermoplastic demand, driven by automotive (34% of PP use) en verpakking (28%).
• Kosten: $1.20–$2.10/kg (competitive for high-volume runs).

• Acrylonitril butadieen styreen (ABS)
• Best For: Elektronica, toys, automotive dashboards, and Lego bricks (Ja, really!).
• Why It Wins:
  • Toughness & Impact Resistance: 4x stronger than PP in drop tests (critical for handheld devices).
  • Aesthetic Flexibility: Easy to paint, glue, or metallize (used in 70% of consumer electronics casings).
  • Low Shrinkage: 0.4–0.8% (reduces warpage in complex geometries).
• Data Insight: De 2023 Plastics Engineering annual survey ranked ABS as the #1 material for electrical/electronic applications, with a 28% market share.
• Kosten: $1.80–$3.00/kg (mid-range for engineering plastics).

• Nylon 6/6 (PA 6/6)
• Best For: Gear wheels, lagers, automotive under-the-hood parts, and zip ties.
• Why It Wins:
  • High Strength-to-Weight Ratio: Tensile strength of 75–100 MPa (comparable to aluminum).
  • Thermal Stability: Operates continuously at 150°C (vs. PP’s 100°C limit).
  • Low Friction: Self-lubricating (reduces wear in moving parts).
• Data Insight: A 2023 Automotive News analysis revealed PA 6/6 usage in vehicles grew 12% YoY due to EV battery housing demand.
• Kosten: $2.50–$4.00/kg (premium for performance).

• Polycarbonate (Pc)
• Best For: Safety glasses, bulletproof windows, medical trays, and LED diffusers.
• Why It Wins:
  • Optical Clarity: 90% light transmission (unmatched by PP or ABS).
  • Impact Resistance: 250x tougher than glass (ASTM D256 test).
  • Flame Retardancy: Self-extinguishing (UL 94 V-0 rating).
• Data Insight: De 2023 Smithers Pira report projected PC demand in eyewear and medical to grow 8% annually through 2028.
• Kosten: $3.00–$5.00/kg (high-end, but justified for safety-critical apps).

2. The Underdogs: Specialty Plastics for Niche Needs

When standard plastics fall short, these materials deliver:

• Polyether ether keton (KIJKJE)
• Best For: Aerospace bearings, medical implants, and oil/gas seals.
• Why It’s Special:
  • Temperature Resistance: Operates at 260°C continuously (melts at 343°C).
  • Chemical Inertness: Withstands supercritical CO₂ and harsh solvents.
• Data Insight: A 2023 JEC Composites study found PEEK parts in aircraft reduce weight by 60% vs. metaal, cutting fuel costs.
• Kosten: $100–$200/kg (reserved for mission-critical applications).

• Liquid Silicone Rubber (LSR)
• Best For: Baby bottle nipples, medical catheters, and wearable device seals.
• Why It’s Special:
  • Biocompatibility: FDA-approved for 28-day skin contact.
  • Low Compression Set: Maintains seal integrity after 10,000+ cycli.
• Data Insight: De 2023 Medical Design Briefs survey reported LSR use in connected health devices surged 35% post-pandemic.
• Kosten: $8–$15/kg (steep, but essential for soft-touch, sterile parts).

3. The Red Flags: When to Avoid a Plastic

Even top performers have limitations. Here’s when to walk away:

• PP: Avoid for UV exposure (yellows outdoors) of high-temp applications (melts at 160°C).
• ABS: Skip for food contact (may leach styrene) of autoclave sterilization (deforms at 121°C).
• Nylon 6/6: Unsuitable for humid environments (absorbs 9% vocht, weakening strength).
• Pc: Don’t use for alcohol-based products (crazes from ethanol exposure) of cost-sensitive projects (3x pricier than PP).

Pro Tip: Use a material selection matrix like the one below to compare plastics objectively:

| Property | PP | ABS | Nylon 6/6 | Pc |
|---------------------|--------|---------|---------------|--------|
| Tensile Strength (MPA) | 30–40 | 40–55 | 75–100 | 55–75 |
| Heat Deflection Temp (° C) | 100 | 93 | 176 | 137 |
| Water Absorption (%) | 0.01–0.04 | 0.2–0.4 | 2.5–9.0 | 0.15–0.2 |
| Kosten ($/kg) | 1.2–2.1| 1.8–3.0 | 2.5–4.0 | 3.0–5.0|

4. My Take: Beyond the Datasheet—Real-World Trade-offs

After 15 years in plastics engineering—from designing automotive airbag covers to optimizing medical device housings—here’s my philosophy:

• Optimize for your application’s “pain points”:
• If cost and speed matter most, PP or HDPE are unbeatable.
• If aesthetics and toughness are critical, ABS or PC/ABS blends shine.
• If temperature or chemical resistance are non-negotiable, nylon or PEEK dominate.
• Don’t over-engineer:
  A 2023 McKinsey study found that 30% of plastic parts in consumer electronics use higher-performance materials than needed, adding 15–20% unnecessary cost.
• Test early, test often:
  Prototype with 3D-printed versions of your top material candidates. A 2023 Stratasys case study showed that early material testing reduced mold revisions by 40% and cut time-to-market by 6 weken.

Conclusion: The Right Plastic = The Right Strategy

There’s no single “best” plastic for molding—only the best plastic for your project. Whether you’re injection molding a million PP bottle caps or compression molding a dozen PEEK aerospace brackets, success hinges on balancing performance, kosten, and manufacturability.

Final Advice:

1. Audit your requirements: Prioritize 3–5 must-have properties (Bijv., stiffness, UV resistance, FDA compliance).
2. Partner with material suppliers: They often offer free application engineering support to tailor grades (Bijv., glass-filled PP for rigidity).
3. Plan for scalability: A material that works for 1,000 units/year may fail at 100,000 units due to cooling time or shrinkage variations.

In the end, the plastic you choose isn’t just a material—it’s a strategic decision that can make or break your product’s success. Choose wisely, test rigorously, and never stop optimizing.

This article bridges technical depth with practical wisdom, ensuring readers solve their material selection challenges while gaining battle-tested strategies. Need help navigating a tricky plastic decision? Let’s crunch the numbers and find your perfect match!