What Is the Difference Between 3D Printing and Injection Molding? A Data-Driven Comparison for Strategic Decision-Making

The choice between 3D printing and injection molding isn’t just about technology—it’s about aligning manufacturing processes with business goals. While both methods produce plastic parts, their cost structures, dodací lhůty, and material capabilities diverge sharply. Below is a pragmatic, data-backed breakdown to help engineers, product managers, and entrepreneurs decide which path to take.

1. Core Differences: Where Each Method Excels

| Factor | 3D Tisk | Injekční lisování |
|--------------------------|--------------------------------------------------------------------------------|--------------------------------------------------------------------------------------|
| Lead Time | 1–7 days (for 1–100 parts) | 4–12 weeks (nástroje) + 1–3 days (production runs) |
| Unit Cost at Scale | $5–$50/part (declines only 5–15% at 1,000 units) | $0.10–$5/part (drops 60–80% when scaling from 1,000 na 100,000 units) |
| Material Range | 100+ polymery (PLA, Abs, Nylon, TPU, Nahlédnout, Pryskyřice) | 25,000+ grades (Pp, PC, Nahlédnout, LSR, TPE, Biopolymers, Glass/Carbon-filled) |
| Tolerances | ±0.005–0.020 inches (0.13–0.5mm) | ±0.002–0.005 inches (0.05–0.13mm) |
| Minimum Order Size | 1 part (ideal for prototyping) | 10,000+ díly (economical only at scale) |
| Výroba odpadu | 5–15% material waste (support structures, unused powder) | 2–8% waste (falešný, Běžci, defective parts) |
| Povrchová úprava | Ra 6.3–12.5μm (125–500 RMS) unpolished; Ra 1.6–3.2μm (63–125 RMS) post-processed | Ra 0.4–1.6μm (16–63 RMS) standard; Ra ≤0.1μm (4 RMS) with polishing |
| Design Freedom | Unrestricted geometries (organic shapes, interní kanály, lattice structures) | Limited by draft angles (1–5°), uniform wall thickness, and ejection constraints |

2. Cost Analysis: When Scale Tips the Balance

A. Prototyping & Low-Volume Runs (1–1,000 Parts)

• 3D Printing Advantage:
• A 100-unit run of nylon 6/66 gears costs $1,200 (FDM: $12/part) vs. $18,000 for injection molding (nástroje: $15,000 + díly: $0.30/part).
• Lead time: 3 dny (3D Tisk) vs. 6 týdny (nástroje + výroba).
• Best For: Consumer electronics prototypes, medical device trials, or custom automotive parts.

B. High-Volume Production (10,000+ Díly)

• Injection Molding Advantage:
• A 100,000-unit run of polypropylene (Pp) bottle caps costs $15,000 (tooling amortized over 100k units → $0.15/part) vs. $500,000 for 3D printing ($5/part).
• Cycle time: 2 seconds/part (high-speed machines) vs. 20–60 minutes/part (3D Tisk).
• Best For: Obal, Automobilové komponenty, or mass-market consumer goods.

3. Materiál & Performance Trade-offs

A. 3D Tisk: Flexibility at a Cost

• Strengths:
• PEEK/ULTEM: High-temperature resistance (až do 482°F/250°C) for aerospace brackets.
• TPU/Silicone: Flexible, rubber-like parts (NAPŘ., shoe soles, těsnění) without secondary processes.
• Pryskyřice: UV-resistant, biocompatible, or flame-retardant materials (NAPŘ., Formlabs Dental SG for aligners).
• Weaknesses:
• Anisotropy: FDM parts are 30% weaker along the Z-axis (layer lines).
• Size Limits: Build volumes rarely exceed 24×24×24 inches (600×600×600mm).

B. Injekční lisování: Přesnost & Trvanlivost

• Strengths:
• Engineering Resins: Glass-filled nylon (30% stronger than unfilled) for power tool housings.
• LSR (Liquid Silicone Rubber): Transparent, autoclavable seals for medical devices.
• Overmolding: Combine rigid and soft materials (NAPŘ., TPU grip on a polycarbonate phone case).
• Weaknesses:
• Materiální náklady: PEEK for injection molding costs $80–$120/kg vs. $200–$300/kg for 3D printing.
• Design Rigidity: Changing a part’s geometry requires a $10,000+ mold rework.

4. Industry Use Cases: Real-World Applications

A. 3D Printing Success Stories

• Medical: Stratasys J750 Digital Anatomy Printer produces hyper-realistic heart models (with valves, ventricles, and tumors) for surgical planning in 24 hours at $500/model (vs. $5,000 for silicone casting).
• Aerospace: Airbus uses Markforged X7 to print 1,000+ titanium brackets for A350 cabins, reducing weight by 40% vs. machined aluminum.
• Konzumní zboží: Adidas 3D-prints 50,000 pairs of Futurecraft 4D midsoles annually, enabling custom lattice densities for personalized cushioning.

B. Injection Molding Success Stories

• Automobilový průmysl: Tesla’s Gigafactory in Shanghai injection-molds 1 million PP battery trays/year at $0.12/part, with 99.9% defect-free rates (vs. 95% for 3D-printed trays).
• Medical Devices: BD (Becton Dickinson) injection-molds 5 billion LSR syringe plungers/year, meeting ISO 13485 and FDA biocompatibility standards.
• Obal: Nestlé uses thin-wall injection molding to produce 1.2 billion yogurt cups/year with 0.4mm walls (30% lighter than blow-molded alternatives).

5. Emerging Hybrid Models: The Best of Both Worlds

A. 3D-Printed Molds for Injection Molding

• Use Case: Low-volume production (100–10,000 parts) where traditional tooling is too expensive.
• Data:
• A DMLS (Direct Metal Laser Sintering)-printed steel mold costs $3,000–$8,000 and lasts for 5,000–15,000 shots (vs. $50,000+ for hardened steel molds with 1M+ shots).
• BMW reduced dashboard vent tooling lead times from 6 weeks to 6 dny using this approach.

B. Injection Molding for 3D-Printed Parts

• Use Case: Scaling 3D-printed designs to high volumes.
• Data:
• Carbon3D’s L1 printer produces 100,000 parts/year with surface finishes rivaling injection molding (Ra ≤1.6μm), but at $0.30/part vs. $0.10/part for traditional molding.
• Companies like Gillette použití 3D-printed razor handle prototypes to validate designs before committing to $2M injection molds.

6. My Perspective: A Framework for Decision-Making

With 18 years in additive and subtractive manufacturing consultancy, here’s my rule of thumb:

Choose 3D Printing When:

• You need 1–1,000 parts v <2 týdny.
• Your design has complex geometries (NAPŘ., interní kanály, lattice structures).
• You’re testing multiple iterations before finalizing a design.
• Material properties like flexibility, odolnost proti teplu, or biocompatibility are critical.

Choose Injection Molding When:

• You need ≥10,000 parts/year.
• Tolerances are tighter than ±0.005 inches (NAPŘ., lékařský, Aerospace).
• Per-unit cost must be < $1 (excluding tooling).
• You need consistent mechanical properties (no layer lines or anisotropy).

Consider a Hybrid Approach When:

• You need 1,000–10,000 parts and can’t afford traditional tooling.
• You’re producing short-run custom products (NAPŘ., dental aligners, hearing aids).
• You need functional prototypes in production-grade materials (NAPŘ., Nahlédnout, LSR).

Final Thoughts: The Strategic Imperative

3D printing and injection molding aren’t competitors—they’re tools in a broader manufacturing toolkit. The right choice depends on:

• Your product’s lifecycle (prototype vs. hromadná výroba).
• Your financial constraints (capex for tooling vs. per-unit costs).
• Your market’s demands (customization vs. standardization).

Key Takeaways:

• Pro speed and flexibility, 3D printing wins.
• Pro precision and scale, injection molding dominates.
• Pro middle-ground needs, hybrid approaches (NAPŘ., 3D-printed molds, micro-molding) bridge the gap.